展樂音響 台南音響 經營品牌 IsoTek




原版 Titan 透過引入 IsoTek 創新的 Direct Coupled© 技術,為高電流電源處理器帶來了新指標,此技術大幅減少了電路阻抗,確保高功率設備能獲得即時、穩定的電源供應。憑藉卓越的設計,旗艦版 EVO3 Super Titan 32A 對此屢獲獎項的技術做進一步提升,提供市場上最高階的高電流電源處理解決方案。

The original Titan redefined the expectations of high current power cleaning with the introduction of IsoTek innovative Direct Coupled© circuit; a technology that dramatically reduces mains impedance and delivers high current devices instantaneous power. The flagship EVO3 Super Titan 32A progresses this award winning design offering the ultimate high current clean power solution on the market.

展樂音響 台南音響 經營品牌 IsoTek EVO3 Super Titan


展樂音響 台南音響 經營品牌 IsoTek EVO3 Super Titan 32A


適用於 High-End 音響或大電流 AV 系統器材
Suitable for high-end audio or AV high current components

RFI(射頻干擾)降低 85dB
RFI reduction 85dB

4 組獨立高電流低阻抗插座
4 independent ultimate high current low impedance power outlet sockets

Removes Common and Differential Mode mains noise

135,500A 瞬時保護,每組輸出插座 112,500A
135’000A instantaneous protection, 112’500A for each outlet

Fully star-earthed network

熱模連續鑄造法的單晶鍍銀銅導線,並帶有 FEP (氟乙烯丙烯)絕緣
Solid core Ohno Continuous Cast copper silver-plated internal wiring with FEP virtual air dielectric.

獨特的 ISIS© 架構系統
Unique ISIS© isolation system eliminates resonance

附贈 IsoTek EVO3 Optimum 電源線
Supplied with ISOTEK EVO3 OPTIMUM Power Cables (1x inlet/4x outlets)

32A Neutrik powerCON 插座
32A Neutrik powerCON outlets

32A 專用電源線
Needs a dedicated 32A power line

設 計

EVO3 Super Titan 與現有的 TITAN 一脈相承,重新定義了高電流、低阻抗電源處理技術。專為滿足 High-End 擴大機的需求而設計。從電流輸出的角度來看,是 EVO3 Titan 的兩倍大,32A 版本的 Super Titan 可以提供高達 7,360W 的連續功率。Super Titan 無疑是世上最強大的發燒級電源處理系統。

EVO3 Super Titan 採用了 IsoTek 獨特的 Direct Coupled© 專利電路架構來重新設計強化,並與四組七階濾波器串並聯組合相結合,可將其比喻為多缸引擎。這四組的結合形成一款強大的電源處理器,此設計在技術上優於單一大型濾波器,該電路由特定元件組成,覆蓋極廣泛的頻率範圍,專業的電感設計,甚至能夠處理低至 5Hz 的電源問題。此獨特電路讓擴大機釋放更多的動態範圍及更大的頻寬,帶來更強勁的低頻衝擊和凝聚力,進一步提升音場、立體成像、低音清晰和控制力,營造一個更開闊和具有空間感的音場。這種獨創技術將改變您的聆聽體驗。

Super Titan 的外殼由鋁材製成,並配備特別開發的支架結構為ISIS©。主體以點狀方式夾於上下兩塊面板之間,每塊面板都由特殊的阻尼共振材料夾在兩塊超高密度板材之間,整體結構由四根實心的鋁製支柱支撐。

ISIS© 是由 Clearlight Audio 創始人兼聲學專業材料開發權威 Kurt Olbert 共同研發,其有兩個主要功能,首先減少空氣振動、顫音效應以及設備本身的次音波振動和共鳴對電子設備性能的負面影響。第二,對於形狀、強度和阻尼共振能力方面,為其放置的設備提供了絕佳的支撐平台,而且可堆疊的設計,在使用多個 IsoTek 系統設備時,能有效節省空間。

EVO3 Super Titan 的尺寸為寬 500mm、深 500mm、高 300mm。在機身後方配置四組獨立高電流輸出插座,可供後級擴大機、單聲道擴大機、主動式喇叭或主動式超低音使用。以及一組「System Link」輸出,可將其他 IsoTek 電源處理器,例如加上 EVO3 Genesis 或 EVO3 Super Nova。

四組串並聯配置的七階電源濾波與 IsoTek 獨特的Direct Coupled© 配合使用,提供了極低阻抗和高電流輸出的電力,並可持續承載 32A 的電流。此系統能有效消除差模和共模噪訊,降低約 85db 的無線射頻干擾(RFI),作用頻率範圍延伸至 5Hz。非常適合高電流設備,從四組輸出插座,持續提供高達 7,360W 的最大輸出功率。

IsoTek的 KERP©(Kirchhoff 等阻抗路徑)技術,確保所有插座獲得均勻一致的阻抗和功率輸出。內部配線採用最高標準,使用超純的 Ohno 單結晶連續鑄造銅芯,並在表面鍍上銀,使得電阻低、電流高。導體周圍有一層氟乙烯基丙烯(FEP)螺旋導管,再加上一層壓制的 FEP 絕緣保護導體,同時形成一個虛擬的空氣絕緣體(FDA)。這套結構確保了卓越性能,實現了極低阻抗和高性能的內部電力傳輸系統。此外,該系統還提供了高達 135,000A 的瞬時保護能力,透過 IsoTek 特有的序列化及可重複的保護系統,如盾牌般守衛您接連的貴重器材,確保其受到優質的安全防範。

Titan 是High-End 音響高電流器材電源升級的最佳選擇,有助於進一步提升音場、立體成像、低音清晰和控制力,營造一個更開闊和具有空間感的音場,也包含 IsoTek 所獲獎項的 Premier 電源線。


Like the existing TITAN the EVO3 Super Titan redefines what is possible for high current, low impedance power cleaning technology. It is designed to meet and exceed the specific demands of high-end power amplifiers. In terms of current delivery it is twice as powerful as the EVO3 Titan, the 32A version of Super Titan offers up to 7’360W of continuous power, Super Titan is quite simply the world’s most powerful audiophile mains power cleaning system.

EVO3 Super Titan features a redesigned and enhanced version of IsoTek’s unique Direct-Coupled© circuit topology working in combination with a group of four seven-stage filters in a series parallel combination. A simple comparison may be drawn to multiple-cylinder engines. The four sections combine to make one ‘super’ seven-element power cleaner, which is inherently superior to engineering a single larger filter. The circuits comprise of bespoke parts that cover an extremely wide frequency band, aided by specialized choke designs that assume mains problems extend as low as 5Hz. This unique circuit allows amplifiers to release more dynamic range with greater bandwidth, giving increased bass slam and articulation, control and a much larger sound stage with holographic front to back layered imaging. This innovative technology will transform your listening pleasure.

Fashioned from aluminium, Super Titan’s rigid outer casing is cradled in a specially developed support structure called ISIS© (Independent System Isolation Support). The main unit is point-clamped between two panels at the top and bottom, each of which is formed of a special resonance-damping material sandwiched between two ultra-dense plates, with the overall structure supported by four substantial aluminium pillars.

ISIS© was developed in conjunction with Kurt Olbert, the founder of Clearlight Audio and an acknowledged expert in developing proprietary materials for audio applications. Its purpose is two-fold. First, it reduces the effect of airborne vibration and microphony, as well as subsonic vibration and resonance in the device itself, which are detrimental to the performance of electronics. Second, its shape, strength and resonance-damping abilities provide a perfect platform on which to place other components, its stackable design saving space when using more than one IsoTek unit.

EVO3 Super Titan measures 500mm in width, 500mm deep and 300mm high. At the rear are four independent high current output sockets to drive power amplifiers, mono blocks, active loudspeakers or a subwoofer. There is also an Auxiliary connection point (System Link) for adding and powering additional IsoTek power cleaners, for example the placement of EVO3 Genesis or EVO3 Super Nova on top.

Working in combination with IsoTek’s unique Direct-Coupled circuit, are four seven-stage power cleaning networks in a series parallel configuration. This delivers extremely low-impedance and high-current power and is capable of running continuously at 32A. Differential Mode and Common Mode noise are removed with an RFI reduction of around 85db extending down to 5Hz frequency range. The product is ideal for high current components and will deliver a continuous maximum of up to 7’360W from the four rear output sockets.

KERP© (Kirchoff’s Equal Resistance Path) ensures equal resistance and equal power delivery to all outlets. The internal wiring is of the highest standard, ultra pure Ohno Continous Cast copper solid core conductor strands with silver-plating, offers low resistance and high amperage. A Fluorinated Ethylene Propylene (FEP) helix is wound around the conductor before an extruded FEP dielectric protects the conductor and creates a Virtual Dielectric of Air dielectric (FDA). This construction gives unrivalled performance and gives the ultimate low resistance, high performance internal power delivery system. Furthermore, 135’000A of instantaneous protection is provided, safeguarding valuable equipment via IsoTek’s unique sequential and repeatable protection system.

Titan is an excellent upgrade for high current electronics in a high-end audio system improving sound stage, three dimensional imaging, bass articulation, control and a sense of extended frequency range and openness. IsoTek’s award winning Premier power cable is also included.

展樂音響 台南音響 經營品牌 IsoTek



共模噪訊通常被稱為射頻干擾(RFI) – 這是我們周圍有但看不見的傳輸頻率。例如,行動電話、基地台、Wi-Fi 和藍牙系統等等無線頻率讓 “共模噪訊” 不斷增加,想像一下智能手機和平板電腦傳輸的數據量有多大;而廉價的電源線就像天線一樣,接收這些不需要的頻率。

Differential Mode mains noise is created by all electrical appliances – everything with a power supply, in fact. This includes your microwave oven, your television and your computer, as well as every hi-fi component you own.

Common Mode mains noise is often referred to as RFI – transmitted frequencies that surround us but we cannot see. For example, imagine how much data is transmitted by smartphones and tablets; cheap power cables act as aerials (antennas) for these unwanted frequencies.

展樂音響 台南音響 經營品牌 IsoTek


從高品質聲音的需求來看,電源需要兩個重要條件:1. 必須有穩定的 50 或 60Hz 正弦波,來源要是低阻抗的。2. 沒有無線射頻噪訊干擾。
低阻抗確保無論周圍區域使用多少電力,電壓都能維持相對穩定。然而,實際上我們可能會有約 5% 的電壓波動。主電力在 50 或 60Hz 時的極低阻抗(低於 1 歐姆)在接近無線電頻率(> 50 歐姆 > 100 千赫)時無法保持,反而充當天線,吸引無線射頻噪訊。

IsoTek 的電力淨化電路的設計目標是在保持安全性的同時,降低阻抗,並在音訊頻率範圍內進行有效校正。這不僅僅是基於良好的電力工程判斷,同時也符合電氣安全規範,經過獨立評估。

From a high quality audio point of view, mains electricity needs two factors; a nice 50 or 60Hz sine wave supplied from a very low impedance source, without radio frequency noise. The low impedance makes for a near constant voltage regardless of how much power is used in the surrounding area. In reality we can typically expect around 5% fluctuation. The very low impedance of the mains, which is way below 1 ohm at 50 or 60Hz is not maintained when approaching radio frequencies (> 50 ohms > 100 kHz) and acts as an aerial (antenna) inviting RF noise.

IsoTek’s power cleaning circuits are designed to reduce impedance whilst remaining safe as well as correcting well into the audio frequency bands. This is not only a judgment from sound electrical engineering, but it also follows the codes of electrical safety, which are independently assessed.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 的許多產品不僅僅是單一的電源淨化系統,更是將多個電源淨化器巧妙結合在一個極簡設計的機箱中。其優勢在於每一台音響器材都擁有專用的淨電供應系統。

因此,IsoTek 的多重濾波系統確保每個音響器材都能獨享專屬的乾淨電源環境,徹底提升整體音響系統的性能。

Many IsoTek products are not just a single power cleaning system but are multiple power cleaners in one convenient chassis. The advantage being that each component in your audio system has own dedicated clean power delivery system. Furthermore, Differential Mode noise, created as electrical devices draw power, is kept to a minimum and the possibility of electrical noise cross contamination between outlet sockets is eliminated.

Many power cleaning systems simply place a standard filter design in a box with all outlet sockets joined together in series one after the other, thus connected equipment cross contaminates and the purpose of the product is lost.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 的產品採用完全獨立的插座,彼此之間沒有直接連接。這對於限制或消除差模式電噪訊的交叉污染是一個至關重要的點。

每個插座直接連接到電路板,並由 IsoTek 獨特的電源處技術提供服務。

IsoTek products feature outlet sockets that are totally independent from each other; no two outlet sockets being directly connected. This is a critical point for limiting or eliminating the cross contamination of Differential Mode mains noise.

Each socket connects directly back to the PCB and is serviced by IsoTek’s unique power cleaning technologies.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 每項產品用的都是頂級電子元件,許多都是特製的,並使用高品質金屬材料。品質的追求不僅止於零件,更延伸至印刷電路板(PCB),該設計能維持高電流輸出和超低電阻,使用的銅量高達一般標準的八倍,再加上純銀鍍層。

內部配線則選用高純度銅結合鍍銀工藝,絕緣材料是航太級的氟化乙烯丙烯(FEP)或 IsoTek 獨有的虛擬空氣 介電(VDA)技術,纏繞 FEP 管再加上 FEP 絕緣層,確保了卓越的傳輸表現,打造出低阻抗、高功率的內部供電系統。

Every IsoTek product uses the finest grade electrical components, many custom made, using the highest quality metals and materials which are specifically designed for purpose. Quality doesn’t stop at parts but also extends into the PCB designs, which maintain high levels of amperage and extraordinarily low levels of resistance, using up to eight times the general standard of copper prior to pure silver plating.

Internal wiring also uses high purity coppers combined with silver plating, with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual Dielectric of Air (VDA), where a FEP tube is wound around the conductor before an extruded FEP dielectric protects this construction giving unrivalled performance and the ultimate low resistance, high performance internal power delivery system.

展樂音響 台南音響 經營品牌 IsoTek



IsoTek 的保護系統配置了一系列壓敏電阻(VDR)串聯防護技術,可提供多達超過 100,000A 的保護等級。根據電源突波或電湧的嚴重程度,快速且順序地介入而當情況需要時,保護電路設計得能立即大範圍反應。

保護電路有兩大主要功能:其一是保護自身,其二是隨著問題的加劇循序介入,對於極端情況則能做出快速反應同時也確保了濾波器的安全,而濾波器在首波保護中也扮演了輔助角色不同於其他保護裝置僅提供保護作用,這些設置還有助於音質提升。研究指出,這樣的問題不僅明顯而且發生頻繁,特別是在 1,000 至 6,000 伏的高壓範圍下更是一大挑戰。許多保護系統未能即時提供足夠的保護,且可能還會影響音質。

Power surges or spikes on the mains supply are generally very bad for any electrical device especially a high quality audio replay system. Power surges occur when there is a boost to the electrical charge at some point in the power lines. This causes an increase in the electrical potential energy, which can increase the current flowing to your wall outlet. This in turn can damage your sensitive audio system.

The IsoTek protection system uses an array of VDRs which offer a cascading level of protection, in some cases over 100,000A. These step in fast and sequentially dependent upon the severity of the encountered power surge or spike. The architecture of the protection circuit extends dramatically and almost instantly when required.

The protection circuit has two primary functions, one to preserve itself and the second to step in gradually as any problem increases, with the ability to act very fast should an extreme condition occur. The protection circuits also protect the filters and the filters assist the protection in the initial stage. Unlike many protection devices these assist sound quality as well as providing protection. Studies suggest this problem is not subtle and is frequent. The disturbing challenge is the 1,000 to 6,000V range. It is likely most protection systems do very little good and probably cause sound degradation.

展樂音響 台南音響 經營品牌 IsoTek

克希何夫 等效電阻電路 K.E.R.P.

根據克希荷夫 的技術論文所示,電路定律是處理電路中電流和電位差(通常稱為電壓)的兩個相等性原則,特別適用於集總電路。這些法則於 1845 年由德國物理學家古斯塔夫·克希荷夫 (Gustav Robert Kirchhoff)首次描述,擴展了喬治·歐姆的研究,並先於詹姆斯·克拉克·馬克士韋的工作。被稱為克希荷夫電路定律(Kirchhoff Circuit Laws)簡稱為克希荷夫定律,它們在電氣工程中得到廣泛應用,形成了電力網路分析的基礎。

IsoTek 對電路的設計受到 克希荷夫的兩個電流定律的引導。簡單的比喻是,如同 自來水廠得到一公升水,希望能無損失的輸送出一公升的水!

換句話說,克希荷夫和高斯描述了透過城鎮的概念解決看似不可能的問題。如果交通在城鎮周圍的圓形軌道上流動,對城鎮沒有影響。然而,一旦交通進入城鎮,就會對城鎮產生影響,而進入的車輛最終都必須離開。城鎮的結構將對這種遷移產生正面或負面的影響。在電子學中,這也是一個重要的觀念,我們必須全面尊重 信號路徑,因為無論是否願意,最終一切都將以不同程度存在於 訊號 路徑中。

Technical papers state that Kirchhoff’s circuit laws are two equalities that deal with the current and potential difference (commonly known as voltage) in the lumped element model of electrical circuits. They were first described in 1845 by German physicist Gustav Kirchhoff. This generalized the work of Georg Ohm and preceded the work of James Clerk Maxwell. Widely used in electrical engineering, they are also called Kirchhoff’s rules or simply Kirchhoff’s laws. These laws can be applied in time and frequency domains and form the basis for network analysis.

The guiding principles for IsoTek circuits are driven by Kirchhoff’s two current laws, a simple analogy would be that for every litre of water placed into a water distribution system we would expect to get the same out.

To put it another way, Kirchhoff and Gauss described how seemingly impossible problems could be resolved by the concept of a town. If traffic flows on a circular orbital road around the town there is no effect on the town. However, if traffic enters the town, then there will be an effect on the town, and however many cars that enter eventually have to leave. The structure of that town will have either a positive or negative effect on that migration. In electronics this is also true. We must totally respect the signal path as, whether one wishes it or not, ultimately everything will be in the signal path to a greater or lesser degree.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 所有產品的內部電線都達到最高標準。使用超純的 Ohno 單結晶連續鑄造銅芯,並在表面鍍上銀,這讓電阻低、電流高。導體周圍有一層氟乙烯基丙烯(FEP)螺旋導管,再加上一層壓制的 FEP 絕緣,保護導體,同時形成一個虛擬的空氣絕緣體(VDA)。這套結構確保了卓越性能,實現了極低阻抗和高性能的內部電力傳輸系統。

IsoTek 的內部佈線與 IsoTek 電源線系列ㄧ起使用可確保持設計和材料特性的共通性。

As one would expect the internal wiring of any IsoTek product is of the highest standard, ultra pure Ohno Continuous Cast copper solid core conductor strands with silver-plating offers low resistance and high amperage. A Fluorinated Ethylene Propylene (FEP) helix is wound around the conductor before an extruded FEP dielectric protects the conductor and creates a Virtual Dielectric of Air (VDA). This construction gives unrivalled performance and gives the ultimate low resistance, high performance internal power delivery system.

IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 致力於 提供充沛且穩定的電源供應,即在電力公司 法規允許的供應範圍內無限制的輸出電流。 IsoTek 設計的電源對於功率擴大機或高功率電子設備來說,能夠提供低阻抗和低直流電阻(DCR)的輸出,這樣可以避免電流受限並提升器材的動態表現。當電源 受到污染時 時,器材的動態範圍也會變差而且到電站之間 的迴路阻抗遠高於此。

從交流電源供應中獲得超過 100% 的輸出是不可能的。依交流電的基本原理是輸送電能而不是存儲能量,而且根據交流電運作原則,是不可能存儲能量。所以「電源儲備」在交流電路中本質上是不存在的,也不可能存在。

電源儲備所需的電壓會隨著歐姆定律增加,並不是說電壓不下降就是電能儲備。交流電(AC)波形在 50Hz 時,每 10 毫秒就在最大值和最小值之間變動,20 毫秒完成一整個週期。因此,實際上交流電(AC)波形的平均值為零。只有轉化為功率波時,由於負數平方變正的原則,而成為正值。以波形來看就像一個膨脹的正弦波,此時 45 度的值為 0.5,而不是三角形函數表中的 0.7071。如果只談電壓波,它長期來看是沒有值的,也就是零!所以談到能量儲存,實際上儲存的能量是零。

直流電阻(DCR)會電壓下降。換句話說,需要開發一個不限制發電站電力儲備的系統,這意味著電路需要在高感抗的同時,並具有極低的阻抗。如果方式正確並保持平衡,那麼在 50/60 Hz 時感抗幾乎為零,直流電阻(DCR)也非常接近零。因此,理想的過濾電路必須保持直流 0Ω 阻抗(或非常接近),並對高於 50/60 Hz 的噪訊具有相當的的交流阻抗。這正是選對材料規格最重要的地方。即便有時
候可能需要用到一些極其特殊的材料,但在重要的關鍵部分,是非常適合使用的。值得註意的是,IsoTek 的濾波設計可以在 50/60 Hz 保持極低的阻抗,但在該頻率上卻有極高的噪訊消除能力。

大多數交流電路不僅僅含有電阻元件,還會表現出電阻結合電容或電感的特性。在理想狀況下,電路中唯一允許存在的阻礙應當是電阻,且電阻值要極低,這就帶來了一個難題,是否追求高的暫態功率,還是要強大的淨化濾波能力來消除雜訊。驚人的是,確實可以兩者兼顧,但要實現這一目標,就得依靠那些極高品質、專為此特定目標設計和結構完全正確的元件,這些高度複雜並專業的元件,僅在特殊領域中才能找到,而 IsoTek 的優勢在於其有能力設計出這些獨特的電子元件。

IsoTek delivers absolute power, unrestricted current delivery within what the power company can supply, and regulations allow. Generally, for power amplifiers or high wattage electronics IsoTek provides output which offers extremely low impedance and low DCR, this completely eliminates (within the concepts of power filtering) any possibility of current restriction and enhances dynamic range, the impedance of the chain back to the power station being far larger. When power is contaminated, dynamic range is reduced.

It is impossible to get more than 100% out of the mains supply. The very principle of AC power is that it doesn’t store energy in the transmission system. It is therefore impossible to store energy in an AC system by the very principles by which it works. There can be no so-called power reserve, thus a power reserve within an AC circuit in the truest sense of the word does not and cannot exist.

Power reserve would require the voltage to increase as ohms law insists it must, saying a circuit doesn’t sag isn’t a reserve of power. The AC waveform goes between maximum and minimum points at 50 Hz in 10 mS, it then swings to the maximum negative value. At 20 mS a full cycle is achieved. Therefore, in fact the average values of an AC waveform is zero. Only as a power wave can it be positive, this is due to the law of squared negatives. It looks like a ballooned sine wave where the value of 45 degrees is 0.5 not 0.7071 from a trigonometric table. Were this only a voltage wave it would have a long-term value of zero! As far as energy storage is concerned zero is the value of stored energy.

Direct Current resistance (DCR) will cause sag. To put it in other words, a system has to be developed which does not limit the power reserve of the power station, meaning a circuit needs to have extremely low resistance whilst maintaining sufficiently high inductance. When done correctly and in perfect balance the inductance is virtually zero at 50/60 Hz and the Direct Current resistance (DCR) is also very close to zero. Therefore, an ideal filter circuit must maintain zero Ohms resistance DC (or very close) and considerable AC resistance to noise above 50/60 Hz. Despite statements to the contrary, this is precisely where correctly specified materials matter most. Whilst some might consider these ‘exotic’ they represent a critical and important part of the function and appropriate to use. Remarkably IsoTek filter designs can maintain very low resistance at 50/60Hz but have very high amounts of noise cancellation above that frequency.

Most AC circuits are reactive – produce a reaction either from the power drawn or the circuit itself, put simply they are not pure resistors and behave like a capacitance and resistance or an inductance and resistance. In an ideal world the only allowable impediment is resistance and ideally this needs to be extremely low. A dilemma, do you want high transient power, or do you want heavy filtration – amazingly you can have both, but one must have components of the very highest quality, which are designed specifically for purpose with totally correct architecture. This is extremely complex and has resulted in the design of specialist parts; these do not exist outside the world of specialist power engineering and are unique to IsoTek designs.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 產品的部分型號配備了 “System Link” 系統連接插座,這個巧妙的設計可以讓將多個裝置互連,同時保持星型接地,進而減少了對牆面插座的依賴。

這對於使用 System Link 將多個裝置串聯在一起特別有用,對於將數個 IsoTek 設備組合起來的用戶來說,尤其方便。
而我們提供的 System Link 專用連接線適用於 EVO3 Initium、EVO3 Premier、EVO3 Sequel、EVO3 Optimum 等不同等級的產品。

Some IsoTek products contain a System Link outlet, this is designed to connect multiple units together, maintaining a stared earth reference, and preserving the need for multiple wall outlet sockets.

This is particularly useful for joining multiple units together using our System Link cable available in EVO3 Initium, EVO3 Premier, EVO3 Sequel and EVO3 Optimum quality.

展樂音響 台南音響 經營品牌 IsoTek


IsoTek 始終堅持以最高標準的客戶服務。為體現我們對產品品質與客戶滿意度的持續承諾,將提供將標準 2 年的產品保固期免費延長至 3 年的機會。

您請簡單地進行產品註冊,您就可以安心享有此項增值服務。IsoTek 尊重並保護您的個人隱私,絕不會未經您許可而與第三方分享您的個人資料。

As part of our on-going commitment to the highest standards of customer service, IsoTek offers you the opportunity to extend the standard 2 years product warranty to 3 years, free of charge.

Simply REGISTER YOUR PURCHASE with IsoTek. We do not share your personal details with any third parties without your permission. To read our Privacy Policy please CLICK HERE.

展樂音響 台南音響 經營品牌 IsoTek


展樂音響 台南音響 經營品牌 IsoTek EVO3 Super Titan 20A

插座數量:4 + System Link

插座輸出規格:Silver-plated 32A Neutrik
TYPE OF OUTLETS:Silver-plated 32A Neutrik

電源輸入:Silver-plated 32A Neutrik
MAINS INLET:Silver-plated 32A Neutrik

MAINS VOLTAGE:100-240V / 50-60Hz

額定功率 230V:x4 (32A 7’360W)
HIGH CURRENT – 230V:x4 (32A 7’360W)

額定功率 115V:x4 (32A 3’680W)
HIGH CURRENT – 115V:x4 (32A 3’680W)



尺寸(寬 x 高 x 深):500 x 300 x 500mm
DIMENSIONS (W X H X D):500 x 300 x 500mm



價格 PRICE 2024


More from the collection

展樂音響 台南音響 經營品牌 IsoTek


展樂音響 台南音響 經營品牌 IsoTek


展樂音響 台南音響 經營品牌 IsoTek


文.展樂音響設計中心    圖.IsoTek